Isotopx announce DG60, a high-performance TIMS degas bench

Isotopx are very pleased to announce the launch of the DG60, a high-performance TIMS degas bench capable of preparing up to 60 filaments in each run.

ISOTOPX DG 60 TIMS degas bench

The DG60 has been developed in collaboration with a number of our users who wanted to maximise filament preparation throughput whilst increasing control over the degassing cycle.

DG60 is a self-contained, floor standing system offering a very high degree of automation. Filaments are subdivided into six batches of 10 with software control allowing complete flexibility so that all 60 filaments can be prepared using the same method, or if required, each batch of 10 can be prepared with a different method.

A high-quality stainless steel vacuum enclosure and high-performance oil-free vacuum system produce an extremely clean degassing environment. Additionally the system includes a negatively charged baffle plate which removes material evolved from filaments which might otherwise become a source of contamination.

The DG 60 can prepare filaments for Isotopx Phoenix, Isoprobe T and VG Sector 54  TIMS systems. Other filaments may also be possible (including from other TIMS manufacturers), please contact us for more details.

A product information sheet on the DG60 is available from the downloads page, link here.

For more information contact Sales@Isotopx.xom

Tags: , ,

Category: Geology, Nuclear, Product News
Published: Wednesday, July 24th, 2013 at 1:38 pm

ISO 9001 Cyber Essentials Plus

Address

Isotopx Ltd
Dalton House,
Dalton Way,
Middlewich, Cheshire,
United Kingdom,
CW10 0HU

Contact

Tel: +44 (0) 1606 839810
Fax: +44 (0) 1606 839811
Email: info@isotopx.com 

Registered in England No: 6447777.
VAT Reg. Number GB 925 9869 62